Disclaimer

Loop Earplugs

Loop Earplugs help you manage sound. Wear them to protect against hearing damage from excess decibels. ​

Insert by taking the earplug between your thumb and index finger. To ease insertion, pull gently at the top of your ear. ​

Softly push and twist until the ear tip seals your ear canal completely. Do not force Loop Earplugs into your ears. ​

Try multiple ear tips to find your perfect fit. Remove your Loop Earplugs using slow, twisting motions to gradually break the seal. Use care when removing Loop Earplugs from your ear as the ear tip has the potential to separate from the Loop during removal. Sudden or rapid removal of the hearing protector can cause damage to the eardrum. If an ear tip becomes stuck when removing your Loops, seek medical assistance. Never attempt to remove lodged ear tips yourself. The ring and silicone ear tips are intended for repeat use and can be cleaned with a damp cloth. Do not use chemicals or sharp objects. If the earplug falls in water or accidentally goes through the washing machine, its function can be restored by letting it dry for a few hours. Do not use heat to dry it. Keep the product away from dust and sand pollution. In the event of pain or discomfort while using your Loop Earplugs, discontinue use. If you continue to experience pain or discomfort, consult a physician. Warning: If using with a connecting cord, these earplugs should not be used where there is a risk that the connecting cord could be caught up during use​​​

Some jurisdictions may prohibit the use of devices like Loop Earplugs while driving. Check the relevant driving and traffic laws before wearing while driving. In the event you use Loop Earplugs to address a noise issue in your place of work, Loop Earplugs may or may not sufficiently reduce noise levels under all conditions to satisfy workplace requirements of the Occupational Health and Safety Administration or the Environmental Protection Agency. ​​

Always wear when in noisy surroundings. It’s highly recommended to only store the earplugs in the provided carry case. Inspect regularly for serviceability. Warning: Choking Hazard - Small Parts. Not suitable for children under 3 years. Adult supervision required for children above 3 years. Keep out of reach of children. If the recommendations in this manual are not adhered to, the protection afforded by the earplugs will be severely impaired. Loop Earplugs are fitted, adjusted and maintained in accordance with the manufacturer's instructions. Loop is not liable for damage by misuse or hearing damage. ​

This earplugs are tested according to EN 352-2:2020 and certified according to Regulation (EU) 2016/425. ​

The full text of the EU declaration of conformity can be found via the following link: loopearplugs.com/doc​​

The product’s hearing protection has an estimated life span of 5 years. Switch packaging and manual rev.01

Loop Link​

Loop Earplugs help you manage sound. Wear them to protect against hearing damage from excess decibels.​

Attach the Loop Link to your earplugs by pulling the soft silicone pieces over the eartips. Hang the cord around your neck and allow the magnetic pieces to snap together. To wear the earplugs, take one earplug in your hand and bring towards the ear. To ease insertion, pull gently at the top of your ear. Softly push and twist until the ear tip seals your ear canal completely. Do not force Loop Earplugs into your ears. Try multiple ear tips to find your perfect fit. Remove your Loop Earplugs using slow, twisting motions to gradually break the seal. Use care when removing Loop Earplugs from your ear as the ear tip has the potential to separate from the Loop during removal. Sudden or rapid removal of the hearing protector can cause damage to the eardrum. If an ear tip becomes stuck when removing your Loops, seek medical assistance. Never attempt to remove lodged ear tips yourself. The entire cord is intended for repeat use, and can be cleaned with a damp cloth. Do not use chemicals or sharp objects. In the event of pain or discomfort while using your Loop Link, discontinue use. If you continue to experience pain or discomfort, consult a physician. ​

Warning: The earplugs should not be used where there is a risk that the Link could be caught up during use. Do not remove earplugs by pulling the interconnecting cord.​

Some jurisdictions may prohibit the use of devices like Loop Earplugs while driving. Check the relevant driving and traffic laws before wearing while driving. In the event you use Loop Earplugs to address a noise issue in your place of work, Loop Earplugs may or may not sufficiently reduce noise levels under all conditions to satisfy workplace requirements of the Occupational Health and Safety Administration or the Environmental Protection Agency.​

Always wear when in noisy surroundings. Always store in the case provided. Inspect regularly for serviceability.​

Keep out of reach of children. If the recommendations in this manual are not adhered to, the protection afforded by the earplugs will be severely impaired. Loop Earplugs are fitted, adjusted and maintained in accordance with the manufacturer's instructions. Loop is not liable for damage by misuse or hearing damage. Loop Link is tested according to EN 352-2:2020 and certified according to Regulation (EU) 2016/425.​